The use of voltage transformer should be paid attention to the following matters

 electric motor stator rotor lamination motor parts 
Specifications
1. Lamination of electric motor 
2. IP54 class F 
3. 100% copper 
4. silicon steel stamping 
5.stunning performance 
1) the secondary side of voltage transformer at work can not be short circuit. In normal work, the second primary side current is very ac electric motor small, almost open state, when the secondary side short circuit, the current large impedance is small (secondary side) will be burning equipment. 2) the secondary side of voltage transformer must be grounded at one end, to prevent the primary and secondary side stroke wear, high pressure into the secondary side, endangers one's personal and equipment safety. 3) voltage transformer connection, one should be paid attention to, the polarity of the secondary side terminals. 


OEM industrial electric motors

Specifications
1. effiency: IE2 and IE1 
2. 20 years manufacturing experience 
3. 12 months guarantee 

4. low noise and vibtration
So as to ensure the accuracy of measurement. 4) the primary and secondary side of voltage transformer are usually should be installed fuse as short circuit protection, primary side should be ANP gost motor installed at the same time isolating switch for safety maintenance. 5) in a circuit and a side PT ark: popular, high screen top small bus voltage of the power supply is provided by the PT ark, PT incase there are both measured PT and PT measurement motor electric (the original is that requires the separation of PT and PT measurement is measurement, the rules and regulations of because measuring the level of transformer is higher than the level of protection of transformer, but now such as no special requirements are not separated, sharing), all small busbar voltage on the top of the screen, for other qualification high voltage measurement, metering, protection with power supply, etc

4 ~ 20 ma signal

 AC Electric motor Plastic fan parts 
Specifications
1. Customised 
2. good quality 
3. 20 years manufacturing experience 

4. Delivery Detail: 20-35 days after receiving payment 

No matter how many, than change of transformer is transmitter output generally acmotortrading.blogspot.com USES is 4 ~ 20 ma signal (far eastone purposes). Access, 100-5 transformer transducer output 20 ma corresponds to the actual current 100 a, 3 phase ac induction motor 4 ma corresponding to 0 a; Access, 300-5 transformer transducer output 20 ma corresponds to the actual current 300 a, 4 ma corresponding to 0 a. ABB inverter ACS800 parameters With resistance in Single phase motor circuit, the current is used to perform a task, to pass on information. If too small, the information will be a loss; (a little rent, a current is too small, to 3 phase induction motor the receiver, the current is too small, so that the receiver can't analysis and accept it.) But is too big, will blow out circuit (not seen collection circuit, so thin copper wire, or painted, current is too large, many with no?)

The application of the switch

 AC fan cooling motor fan cover 
Specifications
1. Customised
2. good quality
3. Surface treatment: Galvanize
4. Type: Motor Cover

As the main connection of local area network (LAN), Ethernet switches become one of the fastest application popularization of network equipment. With the continuous development of switching technology, Ethernet ac electric motor switch prices fell sharply, switch to desktop is the trend of The Times. If your etheric has a large number of users on the network, the busy application and a variety of server, and you also did not make any adjustment to the network structure, so the performance of www.facebook.com/dongfeng.motor the whole network can be very low. One solution is add a 10/100 MBPS Ethernet switches, it can not only process 10 MBPS conventional Ethernet data flow, but also can support 100 MBPS fast Ethernet connection. If the network utilization rate is over 40%, and the collision rate is greater than 10%, the switch can help you to solve any problem.

 Totally Enclosed Protect Feature and Three-phase Phase low rpm ac electric motor
Specifications
power range: 0.12-18.5 kW 
Centre height of frame: 63-160 mm 
Rated Voltage: 380 V 
Rated Frequency: 50Hz or 60Hz 

With 100 MBPS fast Ethernet and 10 MBPS Ethernet port switches can run full duplex mode, can set up a dedicated 20 MBPS fan motor to 200 MBPS connection. Not only the role of different switches under the network environment each are not identical, in the same under the network environment to add a new switch and increase the exchange of existing switch ports have different effects on network. Fully understand and grasp the network flow model is can give play to the role of switch is a very important factor. For the purpose of the switch is as far as possible to reduce and filtering in the network data traffic, so if a switch in the network due to improper installation position setting, almost need to forward to receive all packets, switches will not be able to play its role in optimizing the network performance, but reduces the data transmission speed, increased the network latency.