Wire tube (tube, PVC tube) installation does not conform to the requirements

 Motor parts electric motor fan cover 

Specifications
1.Customised 
2. good quality 
3. 20 years manufacturing experience 
1, the phenomenon of (1), cable pipe multi-layer overlap, there are higher than that of the temple square steel bar gluten. (2), wire and tube side by side for more than 2 or 2 root clingy. (3), electrical, pipe buried depth of the wall is too shallow, and even buried outside the walls of the powder layer. Pipe die bending, folding, dent phenomenon. (4), wire and tube into the distribution box, pipe in mouth not to fill, in the show is too long; Nozzle is not level off, different length; Nozzle without skirts; Not locked. (5), embedded PVC wire pipe not with stopper head plug, but with the clamps bend mouth flat. 2, (1) analysis of the causes, generator construction personnel to the related specifications are not familiar with, careless attitude toward work and convenience, not according to the provisions. Construction administrator management does not reach the designated position. (2), architectural design layout and electrical professional cooperation is not enough, cause more narrow line pipe 3 phase induction motor through the same plane. 3, preventive measures (1), and to strengthen the quality control of construction process of site construction personnel, targeted training of workers; Management personnel must be familiar auto spare parts with related specifications, strict management. 


three phase induction electric motor Y series B35 1.5KW 2.2KW 37KW 75KW

Specifications
-One year warranty 
-Within 25 days delivery 

-Life: 5-7 years 
(2), squirrel cage induction motor three phase induction motor small diesel engine wire and tube multi-layer overlap generally appeared in the high-rise building public channel. When tower house each layer has six sets of the above, the proposal had better use the public corridor of smallpox condole top civil ACTS the role of alternator generator way, so most of the electrical professional into the door line can be directly above the ceiling installation slot to houses. Also can adopt the way of increasing public aisle floor, to hidden many wire and tube. When electrical construction professionals cloth tube should reduce overlapping layers of line pipe at the same point. (3), wire layer cannot clingy, side by side, such as the construction of it is difficult to clearly separate, can be used to separate the small concrete. (4), wire inside the tube into a brick wall, the distance from the surface should not be a boy of 15 mm, to "horizontal flat vertical pipe laying. (5), wire and acmotortrading.blogspot.com tube bending radius (dark bury) should not be less water pump price than 10 times the pipe diameter, pipe bend to bend with pipe bender or kink holding level off is smooth, does not appear the phenomenon such as flat folding, dent. (6), wire and tube into the distribution box should level off, the length is 3 to 5 mm, tube with a sheath and lock box shell. Distribution box into the floor type wire tube, pipe distribution box should be higher than that of base surface is 50-80 - mm. (7), embedded PVC wire tube, it is prohibited to the nozzle with forceps clip flat, curved, fist application conforms to the pipe diameter PVC pipe stopper head to block, and adhesive binding firmly.